ball valve certificate

EO(F)M Electric Actuator - LCD Type Local control Series

HOME > Product Category > Actuator > Electric Actuator > EO(F)M Electric Actuator - LCD Type Local control Series

Major Parameters
Power : AC/DC 24V, AC110-120V, AC220-240V, AC380-440V; 50Hz/60Hz
Environmental Temperature : -25℃~70℃
Relative Humidity : ≦90%(25℃)
Working Environment : Without any high corrosion and explosion medium
Working Time : S2 standard, rated working time is 30min
Local Control Unit : Local control knob of open/close/stop, switch knob of close
                                control/remote control/prohibit control (non-intrusive)
Display Mode : LCD, indication of opening (0-100%) and open / close / fault
Control Mode : On-off signal control, Modulating (proportional regulation)
                         control, Field-bus Control etc.
Type of On-off Signal : Contact signal, Pulse signal
Type of Modulating Signal : 0-10V, 2-10V, 4-20mA, etc.
Type of Field-bus Signal : Modbus-RTU, Profibus-DP, etc.
Local Controller : IR remote control(Optional)
Housing Protection Class : IP67 (Std configuration), IP68 is optional
Remark : IP68 means 15m under water level and 72 hours duration time.